Project

Commercial concrete paving pour

A reinforced concrete paving slab at a commercial yard, from a compacted base and a hand-tied rebar grid to the pour, screed, bull float and power trowel finish.

CompletedSan Antonio area
  • Coned-off work area next to a finished section of concrete
  • Bull float reaching across a fresh concrete slab
  • Crew member pulling a bull float across a fresh concrete slab
  • Fresh concrete slab closed up with a bull float
  • Full rebar grid laid out across the slab area
  • Rebar intersection being tied by hand
  • Crew member guiding the ready-mix chute over the rebar
  • Concrete placed from the chute over the steel
  • Vibrator working concrete around the rebar
  • Crew raking concrete out to the forms
  • Power trowel finishing the slab
  • Finished slab section in the commercial yard

The job

A commercial yard needed a new reinforced concrete slab, placed in sections while the rest of the property kept working around it.

The work

The base was compacted with a double-drum roller, then a full rebar grid was laid out and tied by hand and held up off the base ahead of the pour. Concrete was placed straight from the ready-mix chute, vibrated around the steel and raked out to the forms.

The finish

The crew struck it level with a screed, closed the surface with bull floats, worked the edges with hand tools and brought up the final finish with a power trowel.

Services on this job

Serving this job area from San Antonio, Texas.

Status shown is completed. Client names, addresses and specific figures are left out on purpose.

Have a similar project?

Open 24/7. Free, itemized quotes within 24 hours of the site walk.